Anritsu MS2090A Field Master Pro

Anritsu MS2090A Field Master Pro Spectrum Analyzer

Anritsu’s Field Master Pro MS2090A real time spectrum analyzer delivers performance never previously available in a compact, handheld instrument. With continuous frequency coverage from 9 kHz to 54 GHz, the Field Master Pro MS2090A is specifically designed to meet the test challenges of a full range of other wireless technologies in use today, including: 5G, LTE, wireless backhaul, aerospace/defense, satellite systems, and radar.

The Field Master Pro MS2090A delivers the highest levels of RF performance available in a handheld, touchscreen spectrum analyzer, with a displayed average noise level (DANL) of -164 dBm and Third Order Intercept (TOI) of +20 dBm (typical). This makes measurements such as spectrum clearing, radio alignment, harmonic, and distortion even more accurate than previously possible.

IQ data capture of 5G frames enables the capture and saving of IQ data for off-line processing on a PC using standard data analysis tools.

* Delivering the highest levels of performance available in a handheld RF spectrum analyzer, the Field Master Pro MS2090A instrument gives field engineers and technicians unparalleled measurement accuracy previously reserved for only benchtop instruments.

* 5GNR base station measurement – validate the performance of the gNB base station with essential measurements that are in full compliance with 3GPP TS 38.104 V15, including:
– frequency error
– time offset
– cell/sector ID
– modulation quality
– unwanted emissions
– occupied bandwidth
– adjacent channel leakage ratio
– transmitter spurious to 12.75 GHz
– EIRP- synchronization signal block (SSB)

* 5G coverage mapping – receive a clear representation of the signal strength of 5G transmitters over intended geographic area by continuously measuring RF data – including 5G channel power, EIRP, or RSRP – with results graphically displayed on a digital map or building floor plan.

Specifications:

Frequency Range:
* MS2090A-0709 9 kHz to 9 GHz
* MS2090A-0714 9 kHz to 14 GHz
* MS2090A-0720 9 kHz to 20 GHz
* MS2090A-0726 9 kHz to 26.5 GHz
* MS2090A-0732 9 kHz to 32 GHz
* MS2090A-0743 9 kHz to 43.5 GHz
* MS2090A-0754 9 kHz to 54 GHz
– DANL (w/preamp): -164 dBm
– TOI: +20 dBm
– Analysis bandwidth: 100 MHz
– Demodulation: 5GNR, LTE FDD, RF, and modulation quality plus SSB signal analysis
– Amplitude range: DANL to +30 dBm
– Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
– Resolution bandwidth (RBW): 1 Hz to 10 MHz
– Input SWR: 1.5
– Amplitude accuracy: < 14 GHz ±1.3 dB (±0.5 dB typical)
– RTSA bandwidth: 22, 55, 110 MHz (option dependent)