| Model |
|
70S+ Fusion Splicer |
| Applicable Fibers |
|
Single-mode (G.652 & G.657) |
|
Multimode (G.651.1) |
|
DS (G.653) |
|
CS (G.654), |
|
NZDS (G.655 & G.656) and Erbium-doped fiber |
| Cladding Diameter |
|
80 – 150 μm |
| Coating Diameter |
|
100 μm to 3,000 μm |
| Fiber Cleave Length |
|
5 to 16 mm |
| Typical Average Splice Loss |
|
0.02 dB with SM |
|
0.01 dB with MM |
|
0.04 dB with DS |
|
0.04 dB with NZDS |
| Splicing Time |
|
ULTRA FAST mode — 6 seconds |
|
SM FAST mode — 7 seconds |
|
SM AUTO mode — 10 seconds |
|
AUTO mode — 15 seconds with SM fiber |
| Arc Calibration Method |
|
Automatic |
| Splicing Modes |
|
100 preset and user programmable modes |
| Splice Loss Estimate |
|
Based upon dual camera core axis alignment data |
| Storage of Splice Result |
|
2 |
| Fiber Display |
|
X, Y, or both X, Y |
| Magnification |
|
320X for single X or Y view, or 200X for X and Y view |
| Viewing Method |
|
Dual cameras with 4.7 inch TFT color LCD monitor |
| Operating Condition |
|
0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively |
| Mechanical Proof Test |
|
1.96 to 2.25N |
| Tube Heater |
|
Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time |
|
Typical 13 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves |
| Protection Sleeve Length |
|
60 mm, 40 mm, micro |
| Splice/Heat Cycles with Battery |
|
Typical 200 cycles with power save functions activated |
| Electrode Life |
|
5,000 Arc Discharges |
| Power Supply |
|
Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery |
| Terminals |
|
USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 |
| Wind Protection |
|
Maximum wind velocity of 15 m/s. (34 mph) |
| Dimensions |
|
146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) |
| Weight |
|
2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery |
Reviews
There are no reviews yet.