INNO View 12R Clad Aligment V-groove Ribbon Splicer Kit

INNO View 12R Clad Aligment V-groove Ribbon Splicer Kit

Specifications:

• Number of Fiber: 1, 2, 4, 6, 8, 10, 12
• Applicable Fibers: SM (ITU-T G.652 & G.657) / MM (ITU-T G.651) / DS (ITU-T G.653) / NZDS (ITU-T G.655)
• Compatible Fiber / Cable: Ribbon : 0.25~0.4 mm / Single: 250 μm & 900 μm
• Cleaved Length: 10~13 mm
• Cladding Diameter: 125 μm
• Splicing Mode: Max 100 modes
• Heating Mode: Max 32 modes
• Typical Splice Loss: SM: 0.05dB / MM: 0.02dB / DS: 0.08dB / NZDS: 0.08dB (ITU-T standard)
• Return Loss: >> 60 dB
• Lighting: 3 White LEDs
• Splicing Time: Ribbon fiber : 15 sec / Single fiber : 9 sec
• Estimated Splice Loss: Available
• Heating Sleeve Length: 60mm, 50mm, 40mm, Micro
• Heating Time: Typical 20 sec
• Results Storage: Last 5,000 results
• Tention Test: 1.96~2.25N
• Operating Condition: Operating Altitude: 0~3,660m above sea level / 0~95% relative humidity / -10~50℃ / Max Wind 15m/s
• Storage Condition: 0~95% relative humidity / -40~80℃
• Display: 90° bi-directional view, 5.0” Color High Resolution Display
• Fiber View & Magnification: X, Y, XY, X/Y : 250X Magnification
• Power Supply: AC Input 100-240V, DC Input 9-14V
• No. of Splice & Heating with Battery: 9800m Ah Battery Capacity / Typical 220 times (Splice + Heat)
• Operating Methods: Button / Touch Screen
• Automatic Calibration: Automatic arc calibration by air pressure and temperature
• Electrode Life: 1500 arcs, can be extended by using an electrode grinder
• Terminal: DIN / Micro HDMI
• Dimensions: 160H x 133W x 155D mm (excluding rubber bumper) / 167H x 143W x 163D mm (including rubber bumper)
• Weight: 1.98 KG (without battery) / 2.64 KG (with battery)